Products   : :   Accessories   : :   For Domestic Equipment

CROSSOVER MODULES

FOR FM 330 SERIES OF LINEAR-PHASE ELECTRONIC CROSSOVERS
  • 25 High-Pass and 25 Low-Pass crossover modules in the range from 63Hz to 16kHz are available as standard.
    FM ACOUSTICS produces any specific crossover frequency to customer request should another frequency than the ones indicated below be required.

    		•

    Standard crossover frequencies are:

    63 Hz
    80 Hz
    100 Hz
    125 Hz
    160 Hz
    		 200 Hz
    250 Hz
    315 Hz
    400 Hz
    500 Hz
    		 630 Hz
    800 Hz
    1000 Hz
    1250 Hz
    1600 Hz
    		 0.63 kHz
    0.8 kHz
    1 kHz
    1.25 kHz
    1.6 kHz
    		 2 kHz
    2.5 kHz
    3.15 kHz
    4 kHz
    5 kHz
    		 6.3 kHz
    8 kHz
    10 kHz
    12.5 kHz
    16 kHz

    Order No: ACC-22000 + crossover Frequency + indication if LP (Low Pass) or HP (High Pass)


    Standard crossover frequencies of the filter sections can be varied within the following range:
    FM 332-X100:
    FM 332-X1000:

    FM 333:


    FM 334:


    		 Low to high crossover frequency:
    Low to high crossover frequency:

    Low to mid crossover frequency:
    Mid to high crossover frequency:

    Low to low-mid crossover frequency:
    Low-mid to high-mid crossover frequency:
    High-mid to high crossover frequency:

    		 60Hz
    0.6 kHz

    60Hz
    0.6 kHz

    60Hz
    160Hz
    0.6 kHz
    		 - 1600Hz*
    - 16 kHz*

    - 1600Hz*
    - 16 kHz*

    - 1600 Hz*
    - 3 kHz*
    - 16 kHz*
    * If other frequencies are required, internal filter modules that cover other ranges can be installed on special order.

    RESISTOR MODULES

    FOR FM 122 AND FM 222 PHONO PREAMPLIFIERS    		 click here to see picture

    ACC 22014
    ACC 22015
    ACC 22019
    ACC 22020
    ACC 22021
    ACC 22016
    ACC 22018
    ACC 22022
    ACC 22023
    ACC 22024
    ACC 22029
    for FM 122 / FM 244A, for MC:
    for FM 122 / FM 244A, for MC:
    for FM 122 / FM 244A, for MC:
    for FM 122 / FM 244A, for MC:
    for FM 122 / FM 244A, for MC:
    for FM 122 / FM 244B, for MM:
    for FM 222 for MC:
    for FM 222 for MC:
    for FM 222 for MC:
    for FM 222 for MM:
    for FM 222 for MM & MC:
    6.8k / 1k / 500 / 350 Ohm
    100 / 30 / 10 / 7.5 Ohm
    6.8k / 3k / 1k / 850 Ohm
    6.8k / 5k / 4k / 3.3k Ohm
    6.8k / 100 / 45 / 30 Ohm
    100k / 47k / 33k / 24k Ohm
    180 / 90 / 45 / 35 Ohm / Standard
    1800 / 900 / 450 / 350 Ohm
    18k / 9k / 4.5k / 3.5k Ohm
    100k / 50k / 33k / 24k Ohm
    47k / 300 / 100 / 75 Ohm (MM&MC)

    ATTENTION!

    Resistor Modules cannot be swapped between the FM 122 and the FM 222!
    They are different types and if an FM 122 module would be used in an FM 222 hum and noise are the result. Damage occuring from such installation errors are not covered by warranty.


    SELF ADHESIVE LABELS    		  

    ACC 22027
    ACC 22026
    ACC 22032
    Labels for FM 122: for record coding of Phono Linearizer settings
    Labels for FM 222: for record coding of Phono Linearizer settings
    Labels for FM 133/233/268 for source coding of Harmonic Linearizer settings
    All above are sets of 240 pieces


    FAN FILTERS    		 click here to see picture

    ACC 22004
    Bag of 10 low-restriction replacement fan filters
    (for FM 811, F-50B and FM 800A)


    CABLES

    ACC 22050


    Y-Adaptors, P.I.T. dual shield for 2 pairs of parallel outputs on FM 255/266/268

    ACC 22111
    ACC 22112
    ACC 22113    		 Power supply cable, dual shield, connecting FM 222 to FM 266/268 (l = 0.6 m)
    Power supply cable, dual shield, connecting FM 222 to FM 266/268 (l = 1.2 m)
    Power supply cable, dual shield, connecting FM 222 to FM 266/268 (l = 3.0 m)

       
    © 2003 FM ACOUSTICS LTD.  Last update of this site December 29, 2008